Selecting Satellites - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

All lcd-tv (f)hdtv-sets
Table of Contents

Advertisement

22.4 Set-up of satellite system

Selecting satellites


Section 22.4 only in the case of corresponding equipment or conversion.
You can set up to four satellites in the menu "Con-
figuration". No satellite is set in the factory.
The LNB frequency is used to switch between the
high and low frequency bands. The default fre-
quencies Low band 9.75 GHz and High band
10.60 GHz are set in the factory.
Selecting satellites
• Press the MENU key to open the TV menu.
• Press the red key
the menu "Configuration".
• Press the appropriate nume-
ric key (in this example
select "DVB-S".
• Press the appropriate nume-
ric key (in this example
select "Satellite A".
• Use the - + key to select the
desired satellite. The most
common satellites are dis-
played one after the other,
together with the symbol
rates for each one. Depen-
ding on the satellite, it may
be necessary to set additional symbol rates
manually if the selected satellite uses different
symbol rates and you wish to find the related
transponders in an automatic station search.
• Use the cursor control key to select "Low band"
or "High band". The settings depend on the
components installed in the satellite antenna. For
the correct settings, please consult the data sheet
or the label of the LNB(s) being used.
• Press the OK key to confirm the new settings.
• Press the EXIT key to close the TV menu.
to open
to
to
Configuration
Change with
– +
Accept value with .
Calling the menu
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
Satellite
Astra 19,2°
OK
Low band
9,75 GHz
High band
10,60 GHz
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
MENU
General settings
Manual search
Automatic search
Search settings
Satellit B
Astra 19,2°
DiSEqc system
LNB supply voltage
Symbol rate 1
22000
Symbol rate 2
27500
Symbol rate 3
- - - - -
OK
EXIT
77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents