Metz LCD-TV Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Metz Manuals
  4. LCD TV
  5. LCD-TV
  6. Operating instructions manual

Metz LCD-TV Operating Instructions Manual

Metz lcd-tv user guide
Hide thumbs Also See for LCD-TV:
Table of Contents

Advertisement

Quick Links

See also: Setup Manual , Operating Instructions Manual
H O M E E N T E R TA I N M E N T
O p e r a t i n g i n s t r u c t i o n s
f o r a l l L C D - T V M K s e t s
LCD-TV
M e t z - a l w a y s f i r s t c l a s s .
606 47 2014.A1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LCD-TV and is the answer not in the manual?

Questions and answers

Related Manuals for Metz LCD-TV

Summary of Contents for Metz LCD-TV

  • Page 1 L C D - T V M K s e t s LCD-TV M e t z - a l w a y s f i r s t c l a s s .

  • Page 2: Table Of Contents

    Foreword Dear customer, thank you for selecting a Metz LCD TV set. We have equipped this TV set with a menu system which uses "file cards" and believe that this will provide you with a user interface that is easy to under- stand.
  • Page 3 Contents 22.3 Automatic DVB-C station search ..60 22.3 Manual DVB-C station search ..61 23. Station Logo..... . . 62 24.

  • Page 4: Installation

    „Connecting AV devices“ with the cursor and press „OK“ to display the information. • Only use Metz bases as a stand for the LCD TV. • Use the Metz wall bracket (item no. 604 99 0286.A1) or a suitable OmniMount wall bra- cket to hang the LCD TV on the wall.

  • Page 5: Safety Notes

    • Always place the monitor on a solid, stable surface. • If a cold TV set is moved to a warm room, always allow any condensation on the screen to evaporate before swit- ching it on. • The TV set is intended for use in a dry room.

  • Page 6: The Remote Control

    3. The Remote Control The remote control sends commands to the TV set by means of an infrared sig- nal. You must point it towards the TV set when using it. Note that the remote con- trol may interfere with the operation of other devices which use infrared signals (such as infrared headphones).
  • Page 7 3. The Remote Control Overview of the functions of the keys Switch to DVB radio mode. Switch on from the standby state into radio mode Function keys: F1/F2/F3: press briefly to call the functions set in the factory. F1/F2/F3: press and hold to display a selection of special functions. AV: press to select one of the previously configured AV devices.

  • Page 8: Daily Operation

    Switching on Switch on the TV set with the main switch. The TV set is now in standby mode and the red standby indicator lights. After about five seconds, the TV set swit- ches to programme position 1 or to the programmed initial programme position.

  • Page 9: Station Selection

    Station selection and manage- ment of programme positions The TV set can store the settings for up to 2000 TV stations and 2000 radio stations in so-called programme positions. You can select any of these programme posi- tions with the numeric keys, with the oval rocker key "P+/P-"...

  • Page 10: User Help (Information)

    Opening the Info INFO Information Contents Index Station selection Picture settings Sound settings AV playback Recording facilities: - Timer recording - Direct recording - AV copying Teletext Function keys DVB radio mode Electronic Programm Guide (EPG) Select the underlined text with the cursor. : further information : table of contents INFO...

  • Page 11: Menu Control

    8. Menu Control With the "TV menu", we provide you with an assistant to help you find your way through the many possible settings of the TV set. Don't be afraid to change any settings in the various menus. No changes will be saved unless you press the "OK"...

  • Page 12: Teletext

    Opening the menu TEXT Gehörlose Börse Service BR-Intern Hörfunk Fernsehen Sport Bayern Schlagzeilen Übersicht ProSieben 09.56 talk talk talk..... . 334 10.56 S.O.S.Style &...
  • Page 13 Double font size You can double the size of the font used for Teletext pages with the F1 key. Pres- sing this key once displays an enlarged picture of the upper third of the page. Pressing it a second and third time dis- plays the centre and lower thirds of the page.
  • Page 14 6) Not possible with an external receiver ! 9. Teletext Displaying all Teletext marks If you have set marks for a programme position, you can display an overview of these marks by pressing the F3 key. The displayed list shows whe- re the marks are set.

  • Page 15: Av Playback

    10. AV Playback AV playback (devices with switching voltage) Before they can be used, AV devices must be registered and assigned to the appropri- ate input sockets in the menu "AV devices". Playing back a recording from a video cassette, DVD, etc.
  • Page 16 Opening the menu 10. AV Playback AV playback (devices without switching voltage) Before they can be used, AV devices must be registered and assigned to the appropri- ate input sockets in the menu "AV devi- ces". In order to see the played back picture, HDMI you must switch the TV set to playback mode.

  • Page 17: Av Playback Vcr Function

    10.1 AV Playback VCR function The menu item "VCR" is not available in a 2 ** menu. Picture quality when playing back from tape devices The VCR function ensures an optimum picture quality when playing back recordings from tape devices such as video cassette recorders or cam- corders.

  • Page 18: General Picture Settings

    Opening the menu MENU Sound set,.prog.pos Sound settings, gen. Pict.set.,prog.posn. Pict. settings, gen. Change with – + Brightness Accept current value as default Standard value value. Use as default value: Yes EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.
  • Page 19 11. General Picture Settings Some of the menu items are not available in a 2 ** menu. The picture settings zoom, vertical position, auto- matic zoom and panorama can be set and saved as general settings for all programme positions. Setting the zoom/panorama mode: •...

  • Page 20: Picture Settings For Programmes Via Tv Menu

    Opening the menu MENU Sound set,.prog.pos Sound settings, gen. Pict.set.,prog.posn. Pict. settings, gen. Change with – + Accept value with Noise reduction medium EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

  • Page 21: Picture Settings For Progr. Via Station Table

    11.2 Picture Settings for Programme via Station Table Individual picture settings for programme position xy: • Select the programme position whose picture settings you wish to change. • Press the "MENU" key. The TV menu appears on the screen. • Press the white key .

  • Page 22: General Sound Settings

    Opening the menu MENU Sound set,.prog.pos Sound settings, gen. Pict.set.,prog.posn. Pict. settings, gen. Change with – + Accept current Volume value as default Standard value value. Use as default value : EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.
  • Page 23 12. General Sound Settings Some of the menu items are not available in a 2 ** menu. Setting SRS-WOW • Press the "MENU" key. The TV menu appears on the screen. • Press the blue key . The menu "Picture and sound"...
  • Page 24 Opening the menu MENU Sound set,.prog.pos Sound settings, gen. Pict.set.,prog.posn. Pict. settings, gen. Change with – + Accept value with. Volume control on EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

  • Page 25: Volume Correction

    12.1 Sound Settings for Programmes via TV Menu Some of the menu items are not available in a 2 ** menu. Volume correction Various TV stations broadcast their programmes with different sound volumes. This volume diffe- rence can be minimised by correcting the volume. This adjustment remains active even if the stan- dard sound values are recalled.

  • Page 26: Tone Setting

    Opening the menu MENU Sound set,.prog.pos Sound settings, gen. Pict.set.,prog.posn. Pict. settings, gen. Change with – + Accept value with. Tone settings Speech EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.
  • Page 27 12.1 Sound Settings for Programmes via TV Menu Some of the menu items are not available in a 2 ** menu. Forced mono It may happen that your TV set switches from mono to stereo in the middle of a programme, alt- hough no stereo sound is being transmitted.

  • Page 28: Sound Settings For Prog. Via The Stat. Table

    Opening the menu MENU 0010 Hessen 3 0009 Südwest 0008 0007 PRO 7 0006 RTL 2 0005 0004 SAT 1 0003 Bayern 3 0002 0001 : select Volume correction 0 Tone settings : go to the settings. Forced mono EXIT The number of subjects and sections depends on the selected scope of operation.

  • Page 29: Colour Standard

    13. Colour Standard Some of the menu items are not available in a 2 ** menu. Normally, your TV set will automatically detect the colour standard (PAL, SECAM, NTSC, NTSC44, PAL60, PALM or Pal N) transmitted by each sta- tion. If this does not function correctly for some programme positions, you can select the colour standard manually.

  • Page 30: Childlock

    Opening the menu MENU Recording control Timer setting Timer control Reminder Childlock Change with – + Accept value with Start viewing time--:-- End viewing time --:-- Code **** Activation EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

  • Page 31: Permitted Programmes

    14. Childlock b) Permitted programmes: Activate the childlock as described in step a). Use the corresponding numeric key to select the menu item "Permitted xx progs." (xx = TV, radio or AV). Press the "OK" key and, in the setting win- dow, enter the programme positions with the numeric keys or use the - + key to select the des- ired programme positions.

  • Page 32: Reminder

    Opening the menu MENU Recording control Timer setting Timer control Reminder Childlock Clear the time with Save with Time 21:00 Abort with MENU EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

  • Page 33: Timer Control

    16. Timer Control The menu items "On time" and "Off time" are not available in a 2 ** menu. In the menu item "Timer control", you can pro- gramme a switch-on time, a switch-off time and a sleep timer (switch off after ...). The switch-on time is the time at which the TV set is to be switched on automatically.

  • Page 34: Setting The Time And Date

    Opening the menu MENU Recording control Timer setting Timer control Reminder Childlock Save with Abort with MENU Time 19:00:00 EXIT 16.1 Setting the Time and Date Normally, the TV set will determine the current date and time from the Teletext signals of the cur- rently selected station (providing this station sends Teletext).

  • Page 35: Recording Control

    16.2 Recording Control This menu item is not available in a 2 ** menu. In the menu item "Recording control", you can set a lead time and an overrun time for timer recordings. The TV set is automatically switched to the pro- gramme position from which the recording is to be made at a time which is the number of minutes programmed as the lead time before the pro-...

  • Page 36: Application Example

    Opening the menu 16.2 Recording Control Application example: You wish to record a programme received via DVB-T. The programme starts at 22:45 hours, ends at 23:40 hours and is broadcast on ITV. Set up a "manual timer" as described in Section 18, "Special Functions 2, Timer Overview"...

  • Page 37: Special Functions Picture-In-Picture

    17. Special Functions Picture-in-Picture In the case of TV sets with one front end, the pic- ture in picture function (PIP) can only be used for the superimposition of an AV set. In this regard, the following superimposition options are possible: If an analogue TV station is displayed on the screen, it is only possible to call up the picture of an AV set, which is connected either to the...
  • Page 38 Opening the menu EXIT 17. Special Functions Picture-in-Picture If you wish to display the picture from a connected AV device as a picture-in-picture, press the "AV" key and then use the numeric keys to select the desired AV device. If you wish to display the picture from another sta- tion, use the numeric keys to select the desired programme position.

  • Page 39: Normal/Speech

    17. Special Functions Normal/Speech Selection of "Normal" or "Speech" is des- cribed in Section 12.1, "Tone Settings". In this menu, you can temporarily select "Normal" or "Speech". The selection remains active until you switch to another programme position, switch to standby mode or switch the TV set off completely.
  • Page 40 Opening the menu Recording Preview Reminder Mon Tue Wed Thu – + 20:00  Das Erste Pr 6 Tagesschau SAT 1 22:45  SAT 1 Date 01.05. Planetopia Start 22:45 23:40 Recording device Videorecorder :select 0..9:set time :new timer :clear timer –...

  • Page 41: Direct Recording (Otr)

    17. Special Functions Direct recording of a programme If you wish to record the programme you are cur- rently watching, you can start a direct (one-touch) recording to make the current programme availa- ble to a recording device connected to the EURO sockets.

  • Page 42: Special Functions Picture Format

    Opening the menu Adjusting the picture format: • Press the F3 key. 16:9 full picture Zoom Standard 4:3 — • Press numeric key Standard 4:3 • Use the "P+/P-" rocker key to select the desired func- Panorama 16:9 full picture —...

  • Page 43: Special Functions Picture Position

    17. Special Functions Picture Position If desired, the picture can be shifted up or down in order, for example, to make subtitles visible or to hide "ticker" displays. Adjusting the picture position: • Press the F3 key. If you press F3 briefly, the function pro- grammed for F3 (see Section 18.1, "Programming the Function keys") is executed.

  • Page 44: Programming The Function Keys

    Opening the menu Special functions 2 Normal/Speech Timer overview Direct recording MENU Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating select save and clear. Function for F2 EXIT 18. Programming the Function Keys The remote control has four function keys: F1, F2, F3 and AV.

  • Page 45: Sound Settings Mute Function

    19. Sound Settings Mute Function In the menu "Sound settings", you can activate a two-stage mute function. When this function is active, the volume in TV mode can be reduced in two stages with the mute Activating the mute function •...

  • Page 46: Epg

    Not possible with an external receiver ! 20. EPG EPG is an Electronic Program Guide containing programme information for all important stations. It is broadcast by various stations (in Germany by Kabel1 and RTL 2) and also includes the data for the other TV stations in the country.

  • Page 47: Activating The Epg

    20.1 Activating the EPG The EPG function can be activated by briefly pres- sing the "EPG" key if an EPG programme position has been defined in the menu (see below). If no EPG programme position has been defined in the menu, the following applies.

  • Page 48: Collecting Epg Data

    20.2 Collecting EPG Data The Electronic Programme Guides are broadcast by several different stations, and the information is therefore presented in various layouts. You can thus choose between different EPGs with different appearances. • TV set with a single tuner: select the EPG programme position and leave it selec- ted for 30 minutes •...

  • Page 49: Using The Epg

    20.3 Using the EPG Once all of the EPG data have been collected, briefly pressing the "EPG" key displays the EPG with the current programme on the selected pro- gramme position highlighted. The following keys have special functions in EPG mode: Select a programme.
  • Page 50 Opening the menu Arts Education Children/School Sport Leicure Shows Current affairs Feature film Up to 9 subjects can be selected. detectiv documentary comedy game/quiz/contest motor sports magazine tourism/travel Not possible with an external receiver ! 20.3 Using the EPG Selecting a programme and viewing or setting a reminder In the EPG, you can select a programme with the cursor control key.
  • Page 51 20.3 Using the EPG Programme Information (Now Showing: ..) After switching to a channel, a box is displayed at the bottom of the screen as shown in the picture. This box contains the following informa- tion: - Channel number (in this example: Pr4).

  • Page 52: Using The Epg Recording A Programme

    Opening the menu Not possible with an external receiver ! 20.3 Using the EPG Recording a Programme Selecting a programme for recording: If you have a video recorder with the dialogue system, the EPG permits you to start a recording by pressing a single key.

  • Page 53: Setting The Country And Language

    21. Setting the Country and Language The menu items "Language" and "Country" are not available in a 2 ** menu. Selecting the language in the TV menu You can select any of the available languages for the TV menu. All texts in the menu and in the help screen (Information) are then displayed in the selected language.

  • Page 54: Setting Stations Setting The Reception Mode

    Opening the menu MENU Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Change with the numeric keys or . Accept Start station search – + value with The number of subjects and sections depends on the selected scope of operation.

  • Page 55: Setting Stations

    22.1 Setting Stations TV-Standard for analogue stations Various TV standards for picture and sound are used in different countries. If the wrong TV stan- dard is selected, you will not be able to hear the sound, or it will be distorted. The TV standard "L" also uses a different standard for transmission of the picture.

  • Page 56: Analogue Tv

    Opening the menu MENU Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Start station search with Start station search The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

  • Page 57: Colour Standard For Analogue Stations

    22.1 Setting Stations Colour standard for analogue stations The TV set will normally detect the colour standard (PAL, SECAM, NTSC, NTSC44, PAL60, PAL M) automatically. If this automatic selection does not provide satis- factory results (which should happen only rarely), you can select the colour standard manually for each programme position.

  • Page 58: Automatic Dvb-T Station Search

    Opening the menu MENU Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Change with the numeric keys or . Accept – + Start stadion search value with The number of subjects and sections depends on the selected scope of operation.

  • Page 59: Manual Dvb-T Station Search

    22.2 Setting Stations Manual DVB-T station search For a manual station search, you must know the channel number or the frequency of the station you wish to find. Executing the manual search • Press the "MENU" key to open the TV menu. •...

  • Page 60: Automatic Dvb-C Station Search

    Opening the menu MENU Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Start station search with Symbolrate 1 6900 Symbolrate 2 6875 Symbolrate 3 6111 The number of subjects and sections depends on the selected scope of operation.

  • Page 61: Manual Dvb-C Station Search

    22.3 Setting Stations Manual DVB-C station search For a manual station search, you must know the channel number or the frequency of the station you wish to find. Executing the manual search • Press the "MENU" key to open the TV menu. •...

  • Page 62: Station Logo

    Opening the menu MENU 0010 Hessen 3 0009 Südwest 0008 0007 PRO 7 0006 RTL 2 0005 0004 SAT 1 0003 Bayern 3 0002 0001 :clear all – + :delete character _ , ; :select position :save PQRS :abort MENU EXIT The number of subjects and sections depends on the selected scope of operation.

  • Page 63: Sorting Stations

    24. Sorting Stations You can move, copy and delete individual stations or groups of stations within the station table. Moving, copying and deleting stations • Press the "MENU" key to open the TV menu. • Press the white key to open the station table. •...

  • Page 64: Registering Av Devices

    Opening the menu MENU Other device 3 Other device 2 Other device 1 Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.3 DVD/Videorec.2 DVD/Videorec.1 :select Connect as follows: :connect ➔ and clear.. DVD/Videorec.1 CVBS EXIT Caution! Connection of a new device may cau- se an existing connec- tion diagram to be...

  • Page 65: Registering Av Devices Data Logic

    25. Registering AV Devices Data Logic Data Logic video recorder "Data Logic" is a system which provides a dialo- gue between a TV set and a video recorder. This "intelligent" system offers the features such as: - Automatic transfer of the settings for terrestrial or cable TV stations (not DVB) to the video recorder.
  • Page 66 Opening the menu EXIT MENU Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Change with – + Start data transfer with Start data transfer The number of subjects and sections depends on the selected scope of operation.

  • Page 67: Setting The Signal Types Rgb

    25. Registering AV Devices Setting signal types RGB The signal type always refers to the input and output of the AV device. Some AV devices may use a composite video sig- nal (FBAS) for recording and playback operations and an RGB signal for displaying their menus. It is not possible to make a general statement in this respect.

  • Page 68: Setting The Signal Types Dvi / Hdmi

    Opening the menu MENU Other device 3 Other device 2 Other device 1 Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.3 DVD/Videorec.2 DVD/Videorec.1 Change with – + Accept value with SignalOUT HDMI EXIT The number of subjects and sections depends on the selected scope of operation.

  • Page 69: Setting The Signal Types Yuv

    25. Registering AV Devices Setting signal types YUV Connection of external devices with YUV compo- nent output to the "COMPONENT IN" RCA jacks. The signal type always refers to the input and output of the AV device. AV devices equipped with a YUV jack can be con- nected to the LCD TV by means of a YUV cable (see page 81).

  • Page 70: Removing Av Devices

    Opening the menu MENU Other device 3 Other device 2 Other device 1 Satellit / set top DVD Player 2 DVD Player 1 DVD/Videorec.3 DVD/Videorec.2 DVD/Videorec.1 :select Connect as follows: :connect and clear.. DVD/Videorec. 1 EXIT The number of subjects and sections depends on the selected scope of operation.

  • Page 71: Initial Programme Position

    26. Initial Programme Position Opening the menu You can define an initial programme position in this TV set. This initial programme position is used primarily to select the AV programme position if you use an external receiver. Setting the initial programme position This menu item is not available in a 2 ** menu.

  • Page 72: Sound Via Hifi Amplifier Hifi Output

    HiFi system, you must set the HiFi output to constant. You can then no longer adjust the volume and tone with the Metz remote control. The mute function remains active. If you want to be able to change the...
  • Page 73 27. Sound via HiFi Amplifier HiFi output On the rear of the TV set, you will find audio sockets and a digital audio-out socket (see page 81) which can be used to connect the TV set to a HiFi system (HiFi amplifier). If you wish to play back the sound only via a HiFi system (HiFi amplifier) which is connected with the aid of a Cinch cable, you must select the function...

  • Page 74: Display Configuration

    Opening the menu MENU Function for F3 Function for F2 Function for F1 EURO sockets DVB-C DVB-T Analog-TV Country Language Operating Change with – + Accept value with Display brightness 3 Permanent display Time EXIT The number of subjects and sections depends on the selected scope of operation.

  • Page 75: Dvb Radio Mode

    29. DVB Radio Mode To switch from TV mode to DVB radio mode, press the "R" key. The screen is automatically blanked after about 30 seconds. To switch from DVB radio mode to TV mode, press the "TV" key. Setting DVB radio stations The available DVB radio stations are automatical- ly detected during a station search (see Section 22) and stored in a separate station table at the...

  • Page 76: Scope Of Operation

    30. Scope of Operation The adjustable scope of operation for the TV set can be a great help in finding your way around the complex operating functions of the TV set. The scope of operation can be set to various levels, which are identified by asterisks.
  • Page 77 30. Scope of Operation • Use the - + key to select the desired scope of operation and press the "OK" key to save the new setting. This menu permits you to configure the use of the TV set to a certain degree. All of the functions listed for the 1 menu are available and are supple- mented by the following functions:...

  • Page 78: Operation Without The Remote Control

    31. Operation without the Remote Control Operation without the remote control is provided as an emergency measure in case the batteries of your remote control are exhausted or the remote control is not readily available. The local controls are located on the bottom edge of the TV set, on the right.

  • Page 79: Sound 1, Sound 2

    33. Sound 1, Sound 2 When receiving a dual-language pro- gramme, you can switch between the two sound channels. In TV mode, press and hold the yellow until the sound function "Sound mode" is selected. Then use the - + key to select Sound 1 or Sound 2.

  • Page 80: Connections On The Left

    35. Connections on the Left Headphone socket, diameter 3.5 mm FBAS/Video in (e.g. digital camera or camcorder) Audio in R/L (e.g. camcorder) S-VHS or. Y/C in (e.g. camcorder) Service socket for use by your dealer Antenna socket...

  • Page 81: Connections On The Rear Of The Set

    35.1 Connections on the Rear of the Set (covered by a flap) Viewed from below Audio IN DVI-I connector Video IN YCbCr in YUV in Digital Audio Audio Audio Centre loudspeaker With the aid of an optical audio cable ("Toslink" cable, available from your dealer), the digital audio signal (AC3) provided by the TV set can be extracted for external processing.

  • Page 82: Connecting A Hifi Amplifier/Av Receiver

    35.1 Connecting a Hifi Amplifier/AV Receiver Metz LCD-TV HiFi-amplifier AV-Receiver...
  • Page 83 35.1 Connecting a Hifi Amplifier/AV Receiver Registering the AV Device with the TV • Enter the TV menu by pressing "MENU". • Press the yellow key to open the "AV Devices" menu. • Use the cursor control key Amplifier" in the device selection. •...

  • Page 84: Copying Between Av Devices Direct Recording

    Opening the menu 36. Copying between AV Devices Direct recording If you wish to copy a recording from one of the AV devices connected to your TV set (such as a DVD player) to another connected AV device (such as a video recorder), you must do this by means of a direct recording operation.
  • Page 85 36. Copying between AV Devices Direct recording • Use the cursor control key "Recording device". If only one such device exists, it is then display- ed. If further recording devices exist, you can select the desired device with the aid of the - + key.

  • Page 86: Setting The Picture Format

    Opening the menu MENU Sound set,.prog.pos Sound settings, gen. Pict.set.,prog.posn. Pict. settings, gen. Change with – + Accept value with Picture format Automatic EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

  • Page 87: Glossary

    38. Glossary AV programme position AV devices have one or more connection sockets, depending on the model. The designations of the- se sockets are marked on the device (e.g. AV1). On the AV device, you can select which socket you want to use. The selected socket is shown on the display of the AV device (e.g.

  • Page 88: Stereo Wide

    - + key. Is a registered trade mark of SRS Labs, Inc. The SRS WOW technology is used by Metz under a licence from SRS Labs, Inc.

  • Page 89: Tone Settings

    38. Glossary Tone settings The tone can be set to either "Normal" or "Speech". In the setting "Speech", the bass and treble components of the sound signal are set to make speech as easy to understand as possible. The setting "Normal" is recommended for music programmes.

  • Page 90: Technical Data

    If a DVB-S module is instal- led, the power consumption increases by about 10 W. 39. Technical Data Mains voltage: 230-240 VAC, 50Hz Antenna input: 75 Ohms, unbalanced DIN 45325 Channel coverage: Standard channels 2 - 12, 21 - 69 Special channels S1 - S20, S21 - S41, S42 ...
  • Page 91 39. Technical Data Supported Signal Standards Video HDMI a) 720x480i/p 60Hz RGB b) 720x480i/p 60Hz YCbCr 4:4:4 / 4:2:2 c) 720x576i/p 50Hz RGB d) 720x576i/p 50Hz YCbCr 4:4:4 / 4:2:2 e) 1280x720p 50/60Hz RGB f) 1280x720p 50/60Hz YCbCr 4:4:4 / 4:2:2 g) 1920x1080i 50/60Hz RGB h)1920x1080i 50/60Hz YCbCr 4:4:4 / 4:2:2 i) 640x480p 60Hz RGB...

  • Page 92: Upgrade Kits

    The DVB upgrade kit is installed in the TV set, which means that no external remote control is needed. Ask your local dealer about any further upgrade kits. You can also find further information on our homepage: www.metz.de.

  • Page 93: Inserting/Removing Ca Modules

    40. Inserting/Removing CA Modules The LCD TV has two slots (CI1 / CI2) for CA modules at the top (card reader for smartcards or decoder cards). Chip To insert the CA module, open the lid on the top of the LCD TV and insert the CA module in one of the slots as shown in the pictures.

  • Page 94: Basic Differences Between Analog Terrestrial Reception And Dvb-T

    41. Basic differences between analog terrestrial reception and DVB-T Information for our dealers and interested customers. In order to understand how the behaviour of DVB-T receivers differs from that of the analog terrestrial receivers used until now, two things are important: digital transmission and the simultaneous broad- casting network.
  • Page 95 41. Basic differences between analog terrestrial reception and DVB-T Addition Cancellation In most cases, only a few of the 8,192 carrier frequencies will be fully cancelled out and the information which is lost can be reconstructed by the error-correction function of the receiver. Reception beco- mes impossible only if very strong reflec- tions cause the loss of too many carrier frequencies.

  • Page 96: Lnb Supply Voltage

    Calling the menu MENU Function for F2 Function for F1 EURO sockets DVB-C DVB-T DVB-S Analog-TV Country Language Operating Change with – + Accept value with LNB supply voltage on Power compensation off EXIT The number of subjects and sections depends on the selected scope of operation.

  • Page 97: Diseqc System

    A1.1 Set-up of satellite system DiSEqC system "DiSEqC" makes it possible to control the satel- lite antenna digitally via the existing antenna cable and is a prerequisite for the reception of signals from more than two satellites (e.g. Astra, Eutelsat, Hotbird). If you wish to receive signals from at least three satellites (e.g.

  • Page 98: Selecting Satellites

    Calling the menu MENU Function for F2 Function for F1 EURO sockets DVB-C DVB-T DVB-S Analog-TV Country Language Operating Change with the Satellite Astra 1 Symbol rate 1 22000 numeric keys or . Accept – + Low band 9,75 GHz Symbol rate 2 27500 value with High band10,60 GHz Symbol rate 3 - - - - - EXIT...

  • Page 99: Setting Stations, Search Settings

    A2. Setting the stations Search settings Before executing a DVB station search, you must make the appropriate search settings. Depending on the features installed in the TV set and your personal requirements, you can make the following settings: All = search for all stations on the selected satelli- FTA only = search only for unencrypted (free-to- air) stations on the selected satellite.

  • Page 100: Setting Stations, Automatic Search

    Calling the menu MENU Function for F2 Function for F1 EURO sockets DVB-C DVB-T DVB-S Analog-TV Country Language Operating Change with – + Accept value with Satellite Astra1 EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

  • Page 101: Setting Stations, Manual Search

    A2. Setting the stations Manual search For the manual search, you must know the fre- quency, the symbol rate and the polarisation of the station for which you want to search. Executing the manual search • Press the MENU key to open the TV menu. •...

  • Page 102: Setting Stations, Updating The Data

    Calling the menu MENU Function for F2 Function for F1 EURO sockets DVB-C DVB-T DVB-S Analog-TV Country Language Operating Change with – + Accept value with Update data EXIT The number of subjects and sections depends on the selected scope of operation. Depending on the configuration of the TV set, the various menu items may be displayed in a different order and numbered differently.

  • Page 103: Problems, Possible Causes, Remedies

    Problem TV set does not react • No line of sight between the to commands from remote control and the TV set. the remote control • Sunlight is shining directly on the infrared window of the TV set. • Batteries of the remote control are exhausted.
  • Page 104 Problem General problems • The AV device has not been with an external AV registered in the TV set. device connected to the TV set. Data Logic does not • The Data Logic video recorder work. with data transfer has not been registered correctly.

  • Page 105: Index

    Index Automatic station search ... . . 56-60 AV devices, connecting/registering ..64 AV devices, removing ....70 AV programme position .
  • Page 106 Index Info (Information) ..... 10 Initial programme position....71 Interests (see EPG).
  • Page 107 Index SRS-WOW ......23 Standard picture settings ....18 Standard sound settings .

  • Page 108: Connect A Pc

    Connect a PC To connect a PC to the LCD TV, you must first regi- ster the PC with the LCD TV; see Chapter 25 "Registering AV Devices". Set the signal type for the PC to DVI-A (analogue with VGA cable) or DVI-D (digital with DVI cable), depending on the connection type.
  • Page 109 ✍ Your Metz product was developed and manufactured with high-quality materials and components which can be recycled and/or re-used. This symbol indicates that electrical and electronic equipment must be disposed of separately from normal garbage at the end of its operational lifetime.
  • Page 110 Errors excepted. Subject to changes. Printed in Germany Metz - always first class. Metz - Werke GmbH & Co. KG - Zirndorf near Nürnberg Core competence in the areas of electronics and plastics technology to form the basis of the excellent reputation of the Metz Werke that has been built up throughout the world over a period of many decades.

This manual is also suitable for:

Mk series

Table of Contents

Save PDF