Sound 1, Sound 2; Cleaning The Tv Set - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

When receiving a dual-language pro-
gramme, you can switch between the
two sound channels.
In TV mode, press and hold the yellow
key until the sound function "Sound
mode" is selected.
Then use the - + key to select Sound 1
or Sound 2.

Before cleaning the set, always switch it off with the mains switch!

Incorrect treatment and cleaning of the screen surface can cause irreparable
damage to it. You should therefore always observe the following instructions
for treatment and cleaning of the set.
Treatment:
Always treat the screen surface very carefully.
Take care not to damage it mechanically by shocks, impact, scratching or scraping.
Keep sharp, pointed and hard objects away from the surface of the screen.
Keep the surface of the screen clean.
For cleaning the case and the screen, use only a soft, dry cloth. For removing stub-
born marks, you may moisten the cloth slightly.
Cleaning and care:
The surface of the screen may be cleaned only with a soft, dry cloth (such as a micro-
fleece duster). If any marks cannot be removed with this dry cloth, you may moisten
the cloth slightly.
Take care that no water or other liquid can enter the TV set, since this can cause
serious damage to the set.
If any liquid or other foreign object (pieces of metal, etc.) enters the set, immediately
disconnect the mains plug from the wall outlet.
Never insert your hands or tools into the set, since this may result in electric shocks.

32. Sound 1, Sound 2

33. Cleaning the TV Set

Headph. Vol.
Sound mode Cannel 2
Spatial
Spatial
Sound mode Cannel 2
Balance
99