Manual Search - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Calling the menu

Section 22.5 only in the case of corresponding equipment or conversion.
MENU
Configuration
Start station
Satellite
search with
OK
Symbol rates
Start station search
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
80
For the manual search, you must know the fre-
quency, the symbol rate and the polarisation of
the station for which you want to search.
Executing the manual search
• Press the MENU key to open the TV menu.
• Press the red key
guration"
• Press the appropriate numeric key (in this exam-
ple
• The cursor is located on the line "LNB supply
Function for F2
Function for F1
EURO sockets
DVB-C
Automatic search
DVB-T
DVB-S
Analog-TV
Country
Language
LNB supply voltage
Operating
Astra 19,2° Frequency
27500 Polarisation
• In the setting window, use the cursor control key
- + key to select " H=Horizontal" or "V=Vertical".
• In the setting window, use the cursor control key
symbol rate with the numeric keys.
• In the setting window, use the cursor control key
press the OK key to start the search.
The station is placed in the station table. If des-
ired, you can sort or move stations to other posi-
tions in the table or delete unwanted stations.
For details, see Section 24 of the operating
instructions for the TV set.
22.5 Setting the stations

Manual search

to open the menu "Confi-
to select "DVB-S".
voltage".
• Press the appropriate nume-
ric key (in this example
General settings
select "Manual search".
Manual search
• The cursor then moves to
"Satellite". If more than one
Search settings
satellite is available, use the
Satellit B
- + key to select the desired
Astra 19,2°
satellite.
DiSEqc system
• In the setting window, use
the cursor control key
11836 MHz
select the menu line "Fre-
H
quency".
• Use the numeric keys or the
- + key to set the frequency.
to select the line "Polarisation" and use the
to select the line "Symbol rates" and enter the
to select the line "Start station search" and
to
to