Sound Via Hifi Amplifier Hifi Output - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Opening the menu
MENU
Configuration
Change with
– +
HiFi output
Accept value with .
OK
Output level
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
92
27. Sound via HiFi Amplifier
On the rear of the TV set, you will find audio
sockets and a digital audio-out socket (see page
90) which can be used to connect the TV set to a
HiFi system (HiFi amplifier).
Settings need to be made in the menu items "HiFi
output" and "Sound settings" only if the TV set is
connected to a HiFi system.
If you want adjust the sound settings exclusively on
the HiFi system, you must set the HiFi output to
constant.
You can then no longer adjust the volume and
F1
Function for F2
Function for F1
EURO sockets
Data Logic adjustm.
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating Init. prog.position
constant
50%
• Use the cursor control key
"Initial programme position".
• Use the corresponding numeric key (in the
example:
• In the setting window, use the - + key to set the
desired parameters.
• Press the "OK" key to save the new settings.
• Press the "EXIT" key to close the TV menu.
In normal TV Mode, the function "Sound via..."
can be activated temporarily by pressing the yel-
low key
HiFi output
tone with the Metz remote
control. The mute
remains active.
If you want to be able to
change the sound settings
with the Metz remote control,
CI dialogue via
you must set the HiFi output to
EPG settings
variable.
Operating
Sound settings
Setting the HiFi output
HiFi output 2)
• Press the "MENU" key to
open the TV menu.
• Press the red key
open the menu "Configura-
tion".
·
) to select " HiFi output".
and using the - + key.
function
to
to select