Setting The Signal Types Rgb - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

25. Registering AV Devices
Setting signal types RGB

The signal type always refers to the input
and output of the AV device.
Some AV devices may use a composite video sig-
nal (FBAS) for recording and playback operations
and an RGB signal for displaying their menus.
It is not possible to make a general statement in
this respect. The operating instructions of the AV
device concerned may provide some indication.
If you connect such an AV device with the signal
type "composite video" (FBAS) and recordings are
played back correctly, but you cannot see the
menu of the AV device, you must change the sig-
nal type in the menu "AV devices" to "RGB".
Setting the signal type
• Press the "MENU" key to
open the TV menu.
• Press the yellow key
open the menu "AV devi-
ces".
• Use the cursor control key to
select the AV device whose
signal type you wish to
change and press the "OK"
key.
• Press numeric key
the cursor control key to
select " Signal OUT", and
use the - + key to change the setting to " RGB".
• Press the "OK" key to confirm your selection.
• Press the "EXIT" key to close the TV menu.

Caution ! This may cause an existing con-
nection diagram to be modified. If so, you
must reconnect the AV devices accordingly.
to
AV devices
Change with
Accept value with .
·
, use
Opening the menu
F1
Other device 3
Other device 2
Other device 1
PC
Satellit / set top
DVD Player 2
DVD Player 1
DVD/Videorec.3
DVD/Videorec.2
DVD/Videorec.1
– +
OK
Signal OUT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
MENU
OK
DataLogic
TV-SPDIF input
Name
Signal types
✗
connect
RGB Signal IN CVBS
OK
EXIT
87