Picture Format - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

17. Special Functions

Picture format

Adjusting the picture format:
• Press the F3 key.
If you press F3 briefly, the function programmed
for F3 (see Section 18. "Programming
the Function keys") is executed.
If you hold down F3 for about two
seconds, all possible selections are dis-
played.
• Press numeric key ³ to select the
function "Picture format menu".
• Use the "P+/P-" rocker key to select the
desired function. After selection of a pic-
ture format, you can also adjust the
zoom setting by pressing the - + key
within five seconds.
• The settings made here (except for the automatic
zoom set in the TV menu) remain active
until you switch to a different program-
me position or switch off the TV set.
Zoom / Picture position
After selecting the function "Zoom", you
can adjust the zoom factor with the - +
key. In addition, you can move the pictu-
re position 4) up and down on the screen
in order, for example, to keep the station
logo or the subtitles visible. To change the
picture position, press and hold the F3 key until
the selection is displayed. Then press numeric key
and use the "P+/P-" rocker key to move the
picture.
Standard 4:3
This is the standard setting for all programmes in
the 4:3 picture format.
Opening the menu
16:9 full picture +
Zoom
Standard 4:3 —
F3
Special functions 3 3
1 Picture format
2 Picture pos., vert.
47