Sound Settings For Prog. Via The Stat. Table - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Opening the menu
MENU
F2
0010
0009
0008
0007
0006
0005
0004
Station table
0003
0002
0001
Change with
– +
Volume correction
Accept value with
OK
Forced mono
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
3) See glossary for an explanation.
5) Available only for DVB stations!
7) Available only for analogue stations!
34
12.2 Sound Settings for Prog.

Some of the menu items are not available
in a 2 ** menu.
Making sound corrections:
• Select the programme position whose sound set-
tings you wish to change.
• Press the "MENU" key.
The TV menu appears on the screen.
• Press the white key
played with the currently active programme
F1
Hessen 3
Sound corrections
Südwest
Colour standard
MDR
Picture quality
PRO 7
Picture correct.
RTL 2
✗
RTL
Station contained in EPG
SAT 1 CA module
Signal quality
Bayern 3
DVB-prog. info
ZDF
Frequency/channel
ARD
0 Tone settings
7) off
The use of the - + key to change the selected set-
ting. "gen." means here that the new setting will
overwrite the general sound settings (see pages
26).

The individual settings made here, which
differ from the standard values, remain
saved.
Press the "OK" key to save the new settings.
Press the "EXIT" key to close the TV menu.
via the Station Table
. The station table is dis-
position highlighted.
• Press the F2 key to enable
3)7)
editing of the station table.
• Use the cursor control key
Enter logo
to move to the subjects side.
5)
• Use the corresponding
5)
numeric keys (in this exam-
5)
ple:
7)
tions) to select the desired
menu items.
gen.
• In the setting window, use
the cursor control key to
select the desired functions.
for sound correc-