Tv-Standard; For Analogue Stations - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

22.1 Setting Stations

TV-Standard

Various TV standards for picture and sound are
used in different countries. If the wrong TV stan-
dard is selected, you will not be able to hear the
sound, or it will be distorted. The TV standard "L"
also uses a different standard for transmission of
the picture. The TV standard must therefore be set
before you execute a station search.
The TV set is set in the factory to the TV standard
B/G.
Setting the TV standard
• Press the "MENU" key to
open the
TV menu.
• Press the red key ® to open
the menu "Configuration".
• Use the corresponding
numeric key (in the exam-
¿
ple: ) to select "Analogue
TV".
• The menu item "Search set-
tings" is already selected.
• Press the "OK" key and, in the setting window,
use the - + key to select the desired TV standard.
• Press the "OK" key to confirm your selection.
• Press the "EXIT" key to close the TV menu.

for analogue stations

2)
2)
Configuration
Change with
– +
Accept value with .
Opening the menu
F1
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
OK
TV standard B/G
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
2) Possible only on sets equipped with this
function.
MENU
Terrestrial station search
Search settings 2)
OK
EXIT
67