Normal/Speech; Recording A Programme With A Timer - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Opening the menu
F2
Opening the menu
F2
F1
Recording Yes
Preview
Reminder No
– +
Pr ---
Date --.--.
Start --:--
End --:--
VPS No
Recording device
Videorecorder
Change with .
– +
:select.
:save the timer.
OK
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
44
Special functions 2
1

Normal/Speech

9 Timer-Overview
0 Direct recording
17. Special Functions
If you wish to record a programme which your
video recorder or DVD recorder cannot receive
directly because it does not have a suitable tuner
(such as DVB-T or DVB-C), you can use the "Timer
overview" to make such programmes available to
the recording device.
Setting a timer manually for a recording:
17:23
Mon Tue Wed Thu Fri Sat Sun 29.04.
• If a timer already exists, press the F1 key.
• The cursor is located at the left of the first line
"Record". The number of subjects and sections
17. Special Functions
Normal/Speech
Selection of "Normal" or "Speech" is des-
cribed in Section 12.1, "Tone Settings".
In this menu, you can temporarily select
"Normal" or "Speech". The selection
remains active until you switch to anot-
her programme position, switch to
standby mode or switch the TV set off
completely.
This setting has no effect of the setting
described in Section 12.1, "Tone Set-
tings".

Recording a programme with a timer

• Press the F2 key. If you press F2 brie-
fly, the function programmed for F2
(see Section 18. "Programming the
function keys") is executed.
If you hold down F2 for about two
seconds, all possible selections are dis-
played.
• If all possible selections are displayed,
press the corresponding numeric key
(in the example:
menu.
¾
) to open the timer