Diseqc System - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Calling the menu

Section 22.4 only in the case of corresponding equipment or conversion.
MENU
Configuration
Change with
– +
Accept value with .
OK
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
76
22.4 Set-up of satellite system
"DiSEqC" makes it possible to control the satel-
lite antenna digitally via the existing antenna
cable and is a prerequisite for the reception of
signals from more than two satellites (e.g.
Astra, Eutelsat, Hotbird).
i
If you wish to receive signals from at least three
satellites (e.g. ASTRA 19.2°, Eutelsat 16°, Hot-
bird 13°) the antenna system can be controlled
only with the aid of "DiSEqC".

Function for F2
Function for F1
EURO sockets
DVB-C
Automatic search
DVB-T
DVB-S
Analog-TV
Country
Language
Operating LNB supply voltage

DiSEqc system

• Use the - + to select "Yes" or "No".
• Press the OK key to confirm the new setting.
• Press the EXIT key to close the TV menu.
DiSEqC system
This menu item is not available in a 2**
menu.
Switching DiSEqC on and off
General settings • Press the MENU key to open
Manual search
the TV menu.
• Press the red key
Search settings
the menu "Configuration".
Satellit B
• Press the appropriate nume-
Astra 19,2°
ric key (in this example
DiSEqc system
select "DVB-S".
• Use the cursor control key to
select "DiSEqC system" and
off
press the OK key to confirm
the selection. The cursor is
now located in front of
"DiSEqC system" in the set-
ting window.
to open
to