Recording Control - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

16.2 Recording Control


This menu item is not available in a 2 **
menu.
In the menu item "Recording control", you can set a
lead time and an overrun time for timer recordings.
The TV set is automatically switched to the pro-
gramme position from which the recording is to
be made at a time which is the number of minutes
programmed as the lead time before the pro-
grammed starting time for the recording.
At the end of the programmed recording time, the
TV set remains set to this programme position for
the period programmed as the overrun time.
For VPS recordings, the TV set is automatically
switched to the programme
position from which the recor-
ding is to be made at a time
which is the number of minutes
programmed as the VPS lead
time before the programmed
starting time for the recording.
By default, the TV set switches
to this programme position
about one hour before the pro-
grammed start time for a VPS
recording.
Setting the lead time, VPS
lead time and overrun time
• Press the "MENU" key to open the TV menu.
• Press the green key
• Use the corresponding numeric key (in the exam-
´
ple: ) to select the menu item "Recording con-
trol".
• Use the cursor control key to select the desired
menu item.
• Press the "OK" key and then, in the setting win-
dow, use the - + key to set the desired lead or
overrun time.
Timer
Save with
OK
Abort with
MENU
to open the "Timer" menu.
Opening the menu
MENU
OK
Recording control
Timer setting
Timer control
Reminder
Childlock
Lead time 5 min
OK
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
Lead time with VPS
Overrun time
Lead time
41