Programming The Function Keys - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Opening the menu
F2
MENU
F1
OK
Configuration
select
save and
OK
clear.
EXIT
54

18. Programming the Function Keys

The remote control has four function keys: F1, F2,
F3 and AV. You can programme these function
Special functions 2
1 Normal/Speech
2 Language of progr.
9 Timer overview
0 Direct recording
• Continue pressing the "F1" key until all options
are displayed.
• Use the cursor control key
ding numeric keys to select the desired "Func-
tion for.." (in this example: F2).
• Press the "OK" key and then use the cursor con-
trol key to select one of the available functions.
• Press the "OK" key to assign this function to the
selected function key (the selected function is
F1
Function for F3
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Direct recording
✗
Analog-TV
Timer overview
Country
Language of prog
Language
Normal/Speech
Function for F2 Timer overview
keys with any of the available functions.
If you press and hold any function key, a
window with the available functions is
displayed. The picture on the left shows
the functions available for the F2 key.
Programming function key F1, F2, F3 or
AV with a function
• Press the "MENU" key to open the TV
menu.
• Press the red key
figuration" menu.
marked with "X").
• Press the "EXIT" key to close
the TV menu.

If a function key is pro-
grammed with a func-
tion, this function can be
called by briefly pres-
sing the function key.
Pressing and holding
the function key
displays a list of all
available functions.
to open the "Con-
or the correspon-