Manual Dvb-T Station Search - Metz LCD-TV (F)HDTV-set Operating Instructions Manual

Opening the menu
MENU
Configuration
Start station
Channel
search with .
OK
Mod.-Parameter
Transmission 8k Mode Modulation64 QAM
Mod. Parameter manuell Guard Intervall 1/8
Code rate
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
72
22.2 Setting Stations
For a manual station search, you must know the
channel number or the frequency of the station
you wish to find.
Executing the manual search
• Press the "MENU" key to open the TV menu.
• Press the red key
guration".
• Use the corresponding numeric key (in the
example:
• In the setting window "Antenna", you can switch
the supply voltage for an antenna on or off with
the - + key (see also page 66).
F1
Function for F2
Function for F1
EURO sockets
DVB-C
DVB-T
DVB-S
Analog-TV
Country
Language
Operating
05 Frequency 177.500 Mhz
auto. Start station search
3/4 Start station search
ter" and use the - + key to change the setting there
to "Manual". You can then enter further data.
• After input of the station data, use the cursor
control key to select the menu item "Station
search" and press the "OK" key to confirm your
selection.
The station settings are saved.

Manual DVB-T station search

) to select " DVB-T".
• Use the corresponding
numeric key (in the exam-
ple:
settings".
• In the setting window, use
the - + key to select "All",
General settings
Manual search "FTA only" or "FTA +
Automatic search
CICAM" (see also page 67).
Search settings
• Press the "OK" key and use
Antenna
the corresponding numeric
key (in the example:
select "Manual search".
• In the setting window, use
the numeric keys to enter the channel
number or the frequency.
If you know further data of the desired
station, select the menu item "Mod. parame-
to open the menu "Confi-
·
) to select "search
¿
) to