Registering Av Devices - Metz Axio pro Operating Instructions Manual

30. Registering AV Devices

AV (audio/video) devices are external devices
which deliver video and/or audio signals (such
i
as video recorders, DVD players, DVD recorders,
etc.) and which can be connected to TV sets.
All commonly available AV devices are listed in
the menu "AV devices".
☞
Note that you must always connect AV
devices exactly as shown in the connection
diagram in the TV menu of your TV set !
Registering an AV device on the TV set
• Press the key to open the TV menu.
• Press the yellow key
devices".
• Use the cursor control key
to select the AV device you
wish to register and press
the key.
• Press numeric key
set the signal types
(OUT/IN) that apply to the
AV device with the V-/V+
key and then confirm with
the button.
Signal types:
(also see pages and the use-
r's guide of the respective AV
device).
There are different signal types for the transmis-
sion of picture signals. See next page.
☞
Caution! Connection of a new device may
cause an existing connection diagram to be
changed. If so, you must reconnect the AV
devices accordingly.
to open the menu "AV
and
AV devices
2) Possible only on sets equipped with this
function.
Opening the menu
MENU
F1
Front HDMI
AV-Receiver
Other device 2
Other device 1
PC
Satellite / set top
DVD Player 2
DVD Player 1
DVD/Videorec.2
✗
DVD/Videorec.1
Connect as follows:
VCR
Videorecorder CVBS
EXIT
DataLogic
TV-SPDIF input
2)
Name
Signal types
connect
➔
CVBS EURO1
117