Recording Control - Metz Axio pro Operating Instructions Manual

15.2 Recording Control

☞
This menu item is not available in a 2 **
menu.
In the menu item "Recording control", you can set a
lead time and an overrun time for timer recordings.
The TV set is automatically switched to the pro-
gram position from which the recording is to be
made at a time which is the number of minutes
programmed as the lead time before the pro-
grammed starting time for the recording.
At the end of the programmed recording time, the
TV set remains set to this program position for the
period programmed as the
overrun time.
Setting the lead time, VPS lead
time and overrun time
• Press the key to open
the TV menu.
• Press the green key
open the "Timer" menu.
• Use the corresponding numeric
key (in the example:
select the menu item "Recor-
ding control".
• Use the cursor control key to select the desired
menu item.
• Press the key and then, in the setting win-
dow, use the V-/V+ key to set the desired lead
or overrun time.
• Press the "OK" key to save the settings.
• Press the "EXIT" key to close the TV menu.
Timer settings
to
to
Opening the menu
MENU
Recording control
Timer setting
Timer control
Childlock
Lead time 5 min
EXIT
The number of subjects and sections depends
on the selected scope of operation. Depending
on the configuration of the TV set, the various
menu items may be displayed in a different
order and numbered differently.
Overrun time
Lead time
57