Alarms And Relays - Dedicated Micros DV-IP Installation And Operation Manual

Video
8. 12 & 16 way units
�ID1 to �ID8��ID12��ID16
MON �
M�N B
M�N A
Audio
�udio IN (Dual)
�udio OUT (Dual)
Data
SE��I�� 1
SE��I�� 2
SE��I�� 3 (PTZ)
SE��I�� 4 (PTZ)
US�
IR
NET
��D
EXP
S�T�
Power
PO�E��

Alarms and relays

�����MS IN
��E����S
Dedicated Micros ©2008
75Ω �NC composite video input, 1� pk-pk with loop through
75Ω �NC composite monitor output, 1� pk-pk Ω �NC composite monitor output, 1� pk-pk �NC composite monitor output, 1� pk-pk
Spot Monitor output
S Video Connection
��C� (phono) socket, 8�Hz�16�Hz�22�Hz sampling 75٠input
impedance, 1� pk-pk 1� pk-pk
��C� (phono) socket, line level <100٠output impedance,
1� pk-pk amplification required amplification required
��S-232 (3 wire & 9 wire)
��S-232 (3 wire & 9 wire)
��S-485 (2 wire & 4 wire) or ��S232 (3 wire)
��S-485 (2 wire & 4 wire) or ��S232 (3 wire)
2� US�2.0 connectors
Infra-Red Input connector for IR Remote Control Extender
��J45 Ethernet network connector, 10�100 Mb�s Ethernet Network
��J12 connector for use with Dedicated Micros telemetry
keyboards (��C1, ��C2)
��J12 e�pansion port for future use
2� E-Sata ports available for storage e�pansion
IEC mains power socket & switch
�ia 25-way (female) D Type 24� 200m�
20 general alarm inputs
Range of Alarm states are:
i. 0 – 800�� = Short circuit
ii. 800�� – 2� = closed contact
iii. 2k – 12k = open contact
iv. > 12� = open circuit
�ia 9-way (female) D Type rated at 24� 200m�
4 onboard light duty relay output (500m�@ 12�-48� Ma�)
�Hz�22�Hz sampling 75Ω input sampling 75Ω input
Ω output impedance,
Ω input input
11