Dedicated Micros DV-IP Installation And Operation Manual page 45

Video �utput mode
Mouse Sensitivity
Decoder Mode
�pplet �ocation
Dedicated Micros ©2008
Select the display output that best suits the viewing monitor.
Select from: PAL Default
PAL Reduced
NTSC Default
NTSC Reduced
The sensitivity settings of the mouse can be adjusted from the
least sensitive (1) to the most sensitive (10). The setting can be
adjusted via the slidebar or a number entered directly into the
accompanying te�tbo�. The default setting is 4.
Select from Normal Display or Decoder Mode. Normal Display
allows cameras to be accessed and controlled via the �iewer
menu. In Decoder Mode, connected cameras cannot
be accessed, viewed or controlled.
The location of the unit's �iewer menu applet is displayed. The
default location will always be the applet installed on the unit.
If accessing multiple units via a remote connection, all can be
assigned the same �iewer applet. This will lessen the load time
required when accessing different D���s�Servers via the �iewer.