Electrical Connections - Dedicated Micros DV-IP Installation And Operation Manual

• It is recommended that an uninterrupted power source be connected to the unit in case
of power failure (to ensure continuous operation of the unit). .

Electrical Connections

Please ensure the following are available and have been tested prior to the installation:
•� Mains point
• Network point
• Network cable
• �ctive video signals i.e. at least one working camera feed
• PC with CD ��OM drive and connection to the same network as the D�-IP Server unit
�Recommended�
Quick Overview of DV-IP Server Record Settings
DV-IP Server units provide out of the box:
High performance recording on ��� cameras with minimal configuration.
Consistent recording duration and smooth motion video per camera regardless of the number of
cameras.
Default record settings for 'Normal' variant units is MPEG4 5pps, JPEG 1pps or MultiMode
recording. .
Default record settings for 'Medium' variant units is MPEG4 2pps, JPEG 0.5pps or MultiMode
recording. .
Default 30 or 60 day storage capacity.
Complete Flexibility
The advanced record menu can be used to configure individual cameras to suit specific
requirements e.g. Entry�E�it routes. �arious storage sizes are available dependant on the number of
cameras, the storage options and recording rate selected.
The picture quality can easily be increased if less than 30 days standard recording is required.
Note: It is the Installer/Owner's responsibility to ensure that the record duration is set to the
necessary requirements of the application.
Recording
MultiMode
The unit supports MultiMode recording which is a storage technology developed by Dedicated
Micros. This offers the ability to set different recording rates, resolutions and compression formats
across scheduled, normal and alarm modes for each individual camera.
By varying the quality, bit rate and file size of the recorded images, the MultiMode function can
increase recording capabilities of the unit.
MultiMode offers:
�bility to set different recording resolutions.
�bility to set and switch MPEG4 or JPEG compression recording as required.
�bility to set PPS recording rate per camera.
Dynamically switchable resolution when switching from Normal to Event recording.
Dynamically switchable compression between MPEG4 and JPEG from Normal to Event
recording.
Dedicated Micros ©2008