Dedicated Micros DV-IP Installation And Operation Manual page 88

��eport �larms
��eport Camera Fail
��eport �ctivity
Dial ��etry Time (secs)
��etry �imit
�larm ��esponder Port

This must be enabled for the unit to automatically connect
on alarm.
Enabling this option ensures the unit reports camera failure on
any of the inputs.
Enabling this option ensure the unit reports any �ctivity Detection.
If the initial connection attempt fails, the unit will wait for the
specified time period (in seconds) before attempting to re-connect.
This identifies the number of times the unit will attempt to connect
after a failed attempt. � setting of '0' means no limit and the unit
will continue to try and connect until successful.
This specifies the network port number used for reporting to the
alarm server. In normal circumstances this should be left at the
default value (23).
Dedicated Micros ©2008