Dedicated Micros DV-IP Installation And Operation Manual page 14

Step  Connecting to the Network
The D�-IP Server supports a 10�100Mbps auto-detecting network port. Use a C�T5 cable to connect
the unit to the network.
�y default the unit is configured for DHCP i.e. the unit is automatically allocated an IP address from
a network DHCP server.
DHCP works by assigning an IP address at initial connection to the network. It is possible however
that this IP address can change without notification i.e. following power failure. It is therefore
recommended that the D�-IP Server be allocated a fi�ed IP address. � fi�ed IP address can be
assigned via the Configuration Menu pages:Network Settings->Network->IP Address.
�hen the unit is powered up, the network address can be found by viewing on a local monitor and
navigating to Configuration Menu pages:System Settings->System->IP �ddress.
Refer to 'Configuring The Unit' for further guidance on locating the unit's IP address and for details of
the default DNS (Domain Name Server) address.

1
Dedicated Micros ©2008