Dedicated Micros DV-IP Installation And Operation Manual page 75

Edit Mode
Edit �ction
�ctivity Detection
�ctivity Sensitivity
�ctivity To Trigger
Dedicated Micros ©2008
�eave as 'Normal'. Different Edit Mode functions will be added
following future development.
Select 'Invert' to change the current grid state i.e. Clear to Set.
Select 'Clear' to remove grids or select 'Set' to add grids.
Select 'Enabled' to activate the �ctivity Detection feature.
This option allows the sensitivity setting to be established for the This option allows the sensitivity setting to be established for the
activity grid being configured. There are five settings to choose
from: Indoor High, Indoor �ow, Outdoor High, Outdoor �ow, �ery
�ow.
Following �ctivity activation, select 'Simple ��esponse' to trigger
specific chosen responses. Refer to 'Activity Response Setup' for
more information. Select 'Zone' to apply the Zone Input rules as
configured in the Zone Input menu. Refer to 'Zone Input' for more
information.