VMD/Activity Response Setup
This menu enables response configuration following activity trigger on a selected camera channel.
Note: The responses will only activate when 'Simple Response' is selected in the Activity
Configuration menu.
This option should be used in conjunction with the Activity Setup and VMD Configuration menus.
Channel
Copy To All
Create Database Entry
Profile Change
�larm ��eporting
�larm 24Hr
Protect Alarm Images
Switch Spot Monitor
Enable in Day
Enable in Night
Enable in �eekend
Select the camera input for configuration from the drop down list.
Select to copy the current Activity Response settings to all camera
channels.
�hen selected, an alarm entry will be added to the
Event database.
Select to switch to Profile recording mode upon alarm activation.
This must be enabled for the unit to automatically connect
on alarm.
This will ensure that �ctivity Detection is permanently enabled on
this camera channel.
Select to automatically protect alarm images from
being overwritten.
Enable this option to display alarm activated cameras on the
connected Spot Monitor.
This will enable �ctivity Detection when the unit is in Day (Unset)
operation mode.
This will enable �ctivity Detection when the unit is in Night (Set)
operation mode.
This will enable �ctivity Detection when the unit is in �eekend
(Override) operation mode.
Dedicated Micros ©2008
Need help?
Do you have a question about the DV-IP and is the answer not in the manual?