Radio Interface
Using the CLI to Configure the 802.11a Interface Radio Settings
From the global configuration mode, enter the interface wireless a command to access the 802.11a
radio interface. Set the interface SSID using the ssid command and, if required, configure a name
for the interface using the description command. Use the turbo command to enable this feature
before setting the radio channel with the channel command.
Set any other parameters as required.
Example
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 4102(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout 4102(if-wireless a)#description "Interface RD-AP4102"
RoamAbout 4102(if-wireless a)#ssid r&d
RoamAbout 4102(if-wireless a)#channel 40
RoamAbout 4102(if-wireless a)#secure-access
RoamAbout 4102(if-wireless a)#transmit-power full
RoamAbout 4102(if-wireless a)#speed 9
RoamAbout 4102(if-wireless a)#max-association 32
RoamAbout 4102(if-wireless a)#beacon-interval 150
RoamAbout 4102(if-wireless a)#dtim-period 5
RoamAbout 4102(if-wireless a)#fragmentation-length 512
RoamAbout 4102(if-wireless a)#rts-threshold 256
RoamAbout 4102(if-wireless a)#exit
RoamAbout 4102#
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-61