•
SNMP Targets
–
Target ID is the name you enter to identify the SNMP target. Maximum: 32 characters
–
IP Address is the IP address of the user.
–
UDP port is the UDP port of the server.
–
SNMP user is the name of the user. This name must match the name you entered in SNMP
Users.
–
Filter ID is the filter ID that you entered in the SNMP Filter section.
–
Action Add adds a new target; Edt allows you to edit an existing target; Del deletes the
target.
•
SNMP Filter
–
New Filter is the name you enter to identify a filter that includes or excludes certain
notifications. Maximum: 32 characters.
–
Filter Type specifies whether the filter includes or excludes the specified notification.
Includes means that notifications that are part of the subtree will be filtered out. Exclude
means that notifications that are part of the subtree will be sent.
–
Subtree is an OID string that specifies the family of subtrees included or excluded by this
filter. The string must be preceded with a period (.).
For example, .1.3.6.1.
–
Action Add adds a filter; Edt allows you to edit an existing filter; Del deletes the filter.
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-33
SNMP