System Log; Using Web Management To Configure System Log - Enterasys RoamAbout RBT-4102 Configuration Manual

System Log

System Log
The RBT‐4102 can be configured to send event and error messages to a System Log Server. The
system clock can also be synchronized with a time server, so that all the messages sent to the
Syslog server are stamped with the correct time and date.
The RBT‐4102 supports a logging process that can control error messages saved to memory or sent
to a Syslog server. The logged messages serve as a valuable tool for isolating access point and
network problems.

Using Web Management to Configure System Log

Select System Log from the menu.
• System Log Setup enables the logging of error messages. Default: Disable
• Server (1, 2, 3, 4) enables the sending of log messages to a Syslog server host.Default: Disable
–
–
• Logging Console enables the logging of error messages to the console.
4-44 Advanced Configuration
Server Name/IP is the IP address or name of a Syslog server.
Server UDP Port specifies the UDP port to use on that server.