Radio Interface
Using the CLI to Configure the 802.11b/g Interface Radio Settings
From the global configuration mode, enter the interface wireless g command to access the 802.11g
radio interface. Set the interface SSID using the ssid command and, if required, configure a name
for the interface using the description command. You can also use the secure‐access command to
stop sending the SSID in beacon messages. Select a radio channel or set selection to Auto using the
channel command. Set any other parameters as required.
Example
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 4102(config)#interface wireless g
Enter Wireless configuration commands, one per line.
RoamAbout 4102(if-wireless g)#description "RD-AP4102"
RoamAbout 4102(if-wireless g)#ssid r&d
RoamAbout 4102(if-wireless g)#channel auto
RoamAbout 4102(if-wireless g)#secure-access
RoamAbout 4102(if-wireless g)#radio-mode g
RoamAbout 4102(if-wireless g)#transmit-power full
RoamAbout 4102(if-wireless g)#speed 6
RoamAbout 4102(if-wireless g)#max-association 32
RoamAbout 4102(if-wireless g)#beacon-interval 150
RoamAbout 4102(if-wireless g)#dtim-period 5
RoamAbout 4102(if-wireless g)#fragmentation-length 512
RoamAbout 4102(if-wireless g)#rts-threshold 256
RoamAbout 4102(if-wireless g)#exit
RoamAbout 4102#
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-63