Table 4-2 RADIUS Attributes (continued)
RADIUS Accounting Attribute
NAS Identifier
Acct-Interim-Interval
Using the CLI to Configure RADIUS
From the global configuration mode, use the radius‐server address command to specify the
address of the primary RADIUS server, or the radius‐server secondary address command to
specify the address of the secondary RADIUS server. (The following example configures settings
for the primary RADIUS server.) Use the radius‐server or radius server secondary and key, port,
port‐accounting, retransmit, timeout, and timeout‐interim commands to configure the other
RADIUS server parameters. Use the show radius command from the Executive mode to display
the current settings for the primary and secondary RADIUS servers.
Example
RoamAbout 4102#configure
RoamAbout 4102(config)#radius-server address 192.168.1.25
RoamAbout 4102(config)#radius-server port 1812
RoamAbout 4102(config)#radius-server key green
RoamAbout 4102(config)#radius-server timeout 10
RoamAbout 4102(config)#radius-server retransmit 5
RoamAbout 4102(config)#radius-server port-accounting 1813
RoamAbout 4102(config)#radius-server timeout-interim 500
RoamAbout 4102(config)#exit
RoamAbout 4102#show radius
Radius Server Information
========================================
IP
Port
Key
Retransmit
Timeout
Accounting Port : 1813
InterimUpdate vv: 500
========================================
Radius Secondary Server Information
========================================
IP
Port
Key
Retransmit
Timeout
Accounting Port : DISABLED
InterimUpdate vv: 3600
========================================
RoamAbout 4102#
: 192.168.1.25
: 181
: *****
: 5
: 10
: 0.0.0.0
: 1812
: *****
: 3
: 5
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-13
Description
Hard coded identifier of the RADIUS Accounting
client.
Indicates the number of seconds between each
interim update in seconds for the given session.
RADIUS