Using The Cli To View Event Logs - Enterasys RoamAbout RBT-4102 Configuration Manual

Using the CLI to View Event Logs

From the global configuration mode, use the show logging command.
Examples
RoamAbout 4102#show logging
Logging Information
============================================
Syslog State
Logging Console State
Logging Level
Logging Facility Type
Servers
1: 192.168.1.19, UDP Port: 514, State: Enabled
2: 0.0.0.0, UDP Port: 514, State: Disabled
3: 0.0.0.0, UDP Port: 514, State: Disabled
4: 0.0.0.0, UDP Port: 514, State: Disabled
=============================================
RoamAbout 4102#
To view the access point log entries, use the show event‐log command from the Executive mode.
To clear all log entries from the access point, use the logging clear command from the Global
Configuration mode.
RoamAbout 4102#show event-log
Mar 09 11:57:55
Mar 09 11:57:55
Mar 09 11:57:34
Mar 09 11:57:18
Mar 09 11:56:35
Mar 09 11:55:52
Mar 09 11:55:52
Mar 09 11:55:52
Mar 09 11:55:40
Mar 09 11:55:40
Press <n> next. <p> previous. <a> abort. <y> continue to end :
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 4102(config)#logging clear\
RoamAbout 4102#
To view the access point event entries, use the show events command from the Executive mode.
RoamAbout 4102#show events
Oct 21 10:19:18
Oct 21 10:19:18 Notice: 802.11b/g VAP2:Station Forwarding: 00-e0-63-50-3d-eb Encryption key
type=STATIC WEP
Oct 21 10:19:18
Oct 21 10:19:18
50-3D-EB on Radio b/g VAP 2
Oct 21 10:18:17
type=WPA-PSK-AES
Oct 21 10:18:17
Oct 21 10:18:17
Oct 21 10:18:17
Oct 21 10:18:17
64-3E-60 on Radio b/g Default Interface
Oct 21 10:18:14
: Enabled
: Enabled
: Alert
: 16
Information: 802.11g:11g Radio Interface Enabled
Information: 802.11g:Radio channel updated to 8
Information: 802.11g:11g Radio Interface Enabled
Information: 802.11g:11g Radio Interface Enabled
Information: 802.11a:11a Radio Interface Enabled
Information: SSH task: Set SSH server port to 22
Information: SSH task: Enable SSH server.
Information: Enable Telnet.
Information: 802.11a:11a Radio Interface Disabled
Information: 802.11a:Transmit Power set to QUARTER
Notice: 802.11b/g VAP2:Station Associated: 00-e0-63-50-3d-eb
Notice: 802.11b/g VAP2:Station Authenticated: 00-e0-63-50-3d-eb
Notice: Successful Local MAC Address Authentication for station 00-E0-63-
Notice: 802.11b/g:Station Forwarding: 00-01-f4-64-3e-60 Encryption key
Information: WPA 4-way handshaking successes at 00-01-f4-64-3e-60
Notice: 802.11b/g:Station Associated: 00-01-f4-64-3e-60
Notice: 802.11b/g:Station Authenticated: 00-01-f4-64-3e-60
Notice: Successful Local MAC Address Authentication for station 00-01-F4-
Information: 802.11b/g VAP7:Authentication Mode set to OPEN
RoamAbout RBT-4102 Wireless Access Point Configuration Guide 4-109
Status Information