Status Information
AP System Configuration displays the following basic system configuration settings:
•
System Up Time is the length of time the management agent has been up.
•
MAC Address is the physical layer address for the device.
•
System Name is the name assigned to this system.
•
System Contact is the administrator responsible for the system.
•
IP Address is the IP address of the management interface for this device.
•
IP default gateway is the IP address of the gateway router between this device and management
stations that exist on other network segments.
•
HTTP Server displays enabled if management access via HTTP is enabled on the access point.
•
HTTP Server Port displays the UDP port number used for a secure HTTP connection to the
access point's Web interface.
•
HTTPS Server displays enabled if secure HTTP server is enabled on the access point.
•
HTTPS Server Port displays the TCP port used by the HTTPS interface.
•
Version displays the version number for the runtime code.
AP Wireless Configuration displays the following wireless interface settings:
•
802.1x displays if IEEE 802.1x access control for wireless clients is enabled.
•
SSID is the service set identifier for the wireless group.
•
Channel is the radio channel through which the access point communicates with wireless
clients.
•
Encryption displays enabled or disabled.
•
Authentication Type displays if open system or shared key authentication is used.
4-96 Advanced Configuration