Appendix A: Default Settings - Enterasys RoamAbout RBT-4102 Configuration Manual

This appendix lists the access point system defaults.
To reset the access point defaults, refer to the CLI command "reset configuration" from the
Executive level prompt.
Feature
Identification
Administration
TCP/IP
RADIUS (Primary and
Secondary)
Parameter
System Name
User Name
Password
Com Port
DHCP
HTTP Server
HTTP Port
HTTPS Server
HTTPS Port
SSH Server
SSH Server Port
IP Telnet Server
IP Address
Subnet Mask
Default Gateway
Primary DNS Address
Secondary DNS Address
IP Address
Port
Port Accounting
Timeout
Timeout Interim
Retransmit attempts
RoamAbout RBT-4102 Wireless Access Point Configuration Guide A-1
Default Settings
Default
RoamAbout AP
admin
password
Enabled
Enabled
Enabled
80
Enabled
443
Enabled
22
Enabled
192.168.1.1
255.255.255.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
1812
Disabled, 1813
5 seconds
3600 seconds (one hour)
3
A