Enterasys RoamAbout RBT-4102 Configuration Manual page 56

Filter Control and VLANs
From the interface ethernet mode, use the untagged‐vlanid to specify a VLAN ID for the AP to
use for untagged packets entering through the AP's Ethernet port. Use the show interface
command from the Executive mode to view untagged‐vlanid status.
4-20 Advanced Configuration
RoamAbout 4102#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 4102(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 4102(if-ethernet)#untagged-vlanid 10
RoamAbout 4102(if-ethernet)#exit
RoamAbout 4102#show interface
Ethernet Interface Information
========================================
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Admin status
Operational status
Untagged VlanId
========================================
RoamAbout 4102#
: 10.2.43.203
: 255.255.0.0
: 10.2.1.1
: 134.141.93.21
: 134.141.79.92
: Up
: Up
: 10