B-2 802.11A Radio Specifications - Enterasys RoamAbout RBT-1602 Installation Manual

Table B-1 AP Mechanical and Compliance Specifications (continued)
Specification
Standards compliance
Safety and electromagnetic
compliance
Encryption
General
Table B-2 802.11a Radio Specifications
Specification
Antenna type
Antenna gain
Frequency band
Operating channels
Association rates
Modulation
Transmit power
B-2 Technical Specifications
Description
IEEE 802.11
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.3af
FCC Part 15, UL 60950
UL 2043 Plenum Rated
IC Part 15, CSA 22.2 N0-950, RSS-139-1 and RSS-210
ETS 300 328 (2.4 GHz) and 301 893 (5 GHz), EN 301 489-17
R&TTE Directive 1999/5/EC
TELEC, ARIB T66
GBT-15941-1995, GBT-16841-1997
LP0002
Wi-Fi Protected Access (WPA)
Advanced Encryption Standard (AES)
40-bit/104-bit Wired-Equivalent Privacy (WEP)
Power-save mode supported
Transmit power control in 1 dBm increments
Supports up to 250 clients per radio
Description
Integrated diversity omnidirectional
External sectorized or directional (optional)
Internal: 3 dBi
External: Not available.
5.15 GHz to 5.85 GHz based on country regulations
Based on the country of operation specified by the system administrator
54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and
6 Mbps, with automatic fallback. You can connect the AP via a switch that
provides PoE, or to the network with a PoE power injector.
Orthogonal frequency division multiplexing (OFDM)
18 dBM across all frequencies