Using Web Management To View Event Logs - Enterasys RoamAbout RBT-4102 Configuration Manual

Status Information

Using Web Management to View Event Logs

The Event Logs window shows the log messages generated by the access point and stored in
memory. The Clear Logs button clears all event logs.
Event Logs displays the following information:
• Log Time is the time the log message was generated.
• Event Level is the logging level associated with this message. For a description of the various
levels, refer to "Logging Level Descriptions" on page 4‐45.
• Event Message is the content of the log message.
• Error Messages. An example of a logged error message is: "Station Failed to authenticate
(unsupported algorithm)."
This message may be caused by any of the following conditions:
–
–
–
4-108 Advanced Configuration
The Access point was set to "Open Authentication," but a client sent an authentication
request frame with a "Shared key."
The Access point was set to "Shared Key Authentication," but a client sent an
authentication frame for "Open System."
The WEP keys do not match: When the access point uses "Shared Key Authentication,"
but the key used by client and access point are not the same, the frame will be decrypted
incorrectly, using the wrong algorithm and sequence number.