Using The Cli To Configure System Information - Enterasys RoamAbout RBT-4102 Configuration Manual

Identification

Using the CLI to Configure System Information

From the config mode, use the system name command to specify a new system name. Then return
to the Executive mode, and use the show system command to display the changes to the system
identification settings.
RoamAbout 4102#configure
RoamAbout 4102(config)#system name R&D
RoamAbout 4102(config)#exit
RoamAbout 4102#show system
System Information
====================================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code : SG - SINGAPORE
Ethernet MAC Address : 00-01-F4-61-9C-08
802.11a MAC Address
802.11b/g MAC Address : Default=00-0C-DB-81-3D-CD
IP Address
Subnet Mask
Default Gateway
Management VLAN ID(AP : 3
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
HTTPS Server
HTTPS Server Port
Slot Status
SSH Server
SSH Server Port
Telnet Server
Com Port
Software Version
====================================================================
RoamAbout 4102#
4-4 Advanced Configuration
: 034830992141
: 0 days, 5 hours, 8 minutes, 42 seconds
: RoamAbout AP
:
:
: Default=00-01-F4-61-9C-36 VAP1=00-01-F4-36-3C-36
VAP2=00-01-F4-36-4C-36
VAP4=00-01-F4-36-6C-36
VAP6=00-01-F4-36-8C-36
VAP2=00-0C-DB-81-3D-CF
VAP4=00-0C-DB-81-3D-D1
VAP6=00-0C-DB-81-3D-D3
: 10.2.43.203
: 255.255.0.0
: 10.2.1.1
: ENABLED
: DISABLED
: ENABLED
: 80
: ENABLED
: 443
: Dual band(a/g)
: ENABLED
: 22
: ENABLED
: ENABLED
: V1.0.16
VAP3=00-01-F4-36-5C-36
VAP5=00-01-F4-36-7C-36
VAP7=00-01-F4-36-9C-36
VAP1=00-0C-DB-81-3D-CE
VAP3=00-0C-DB-81-3D-D0
VAP5=00-0C-DB-81-3D-D2
VAP7=00-0C-DB-81-3D-D4