Networking And Client Services; Change Password; Set Time Zone; Lan Gateway And Dhcp Settings - Enterasys R1 SOHO User Manual

Enterasys roamabout r1 soho access point: user guide

Hide thumbs Also See for R1 SOHO:

Table of Contents

Networking and Client Services

Use the Setup page to configure the LAN interface (including TCP/IP parameters for the

RoamAbout R1's gateway address, DHCP address pool for dynamic client address

allocation), the WAN connection options, DNS domain name mapping, the wireless

interface, and other advanced services.

You can use the Setup Wizard by clicking on the Start button at the bottom of the first page.

Use this page to restrict management access based on a specific password. You need a

password to access the configuration options provided by the Setup and Tools pages. By

default, the password is password. It is strongly recommended that you change the default

password as soon as possible.T he Status and Help pages are not password protected.

Passwords can contain from 3 to12 alphanumeric characters, and are not case sensitive.

NOTE

Set the time zone for the RoamAbout R1. This information is used for log entries and client

filtering.

Configure the gateway address of the RoamAbout R1. To dynamically assign the IP

address for client PCs, enable the DHCP Server, set the lease time, and then specify the

address range. Also remember to configure all of your client PCs for dynamic address

allocation.

Valid IP addresses consist of four numbers, and are separated by periods. The first three

fields are the network portion, and can be from 0–255, while the last field is the host portion

and can be from 1–254. Do not include the gateway address of the RoamAbout R1 in the

client address pool.

2-4

If your password is lost, or you cannot gain access to the management

interface, press the Reset button on the back panel for at least 5 seconds to

restore the factory defaults.

Table of Contents

Roamabout r1