Using Web Management To View Cdp Status - Enterasys RoamAbout RBT-4102 Configuration Manual

Status Information

Using Web Management to View CDP Status

The CDP Status window shows the CDP enabled devices currently associated with the access
point. Select CDP Status from the menu.
Neighbors Information displays the following details of neighboring CDP enabled devices:
• IP Address – IP address of the management interface for the neighboring device.
• MAC Address – The physical layer address for the neighboring device.
• Time Mark – Time at which the device was detected.
• Device Type – The type of device detected.
• Description – The information given out by the neighboring device to its type and usage.
• Port – Shows the TCP port used by the HTTP interface.
Traffic Information displays the following details of neighboring CDP enabled devices:
• Input/Output Packets – Total number of CDP (Certificate Discovery Protocol) packets
• Invalid Version Packets – Count of CDP packets received by the device with an invalid
• Transmit Error Packets – Count of errors made by the device while trying to send CDP
• Parse Error Packets – Count of CDP packets received by the device that could not be parsed.
• Memory Error Packets – Count of memory errors that occurred in the device while either
4-98 Advanced Configuration
received/sent by the device over all ports.
version.
packets.
trying to process a CDP packet, or adding to the neighbor entry, or while trying to send a
CDP packet.