Status Information
Using Web Management to View WDS-STP Status
Select WDS‐STP Status from the menu.
•
Port number is the designated port.
•
Priority defines the priority of the port in STP. If the path cost for all ports on a switch are the
same, the port with the highest priority (for example, the lowest value), will be configured as
an active link in the spanning tree.
•
Path Cost is used by STP to determine the best path between devices. Path takes precedence
over priority.
•
Status displays whether or not a Child connection is enabled or disabled.
•
State displays forwarding if the Child is connected.
•
Designated Root the physical address of the root bridge.
•
Designated Bridge is the physical layer address of the root bridge, or bridge unit, root
connected to the root bridge.
•
Forward Transitions
4-104 Advanced Configuration