Testing The Coverage Area; Antenna Information - Enterasys RoamAbout R2 Installation Manual

Testing the Coverage Area

Testing the Coverage Area
Enterasys Networks recommends that you test the coverage area before you permanently
install the RoamAbout R2. The coverage area is where wireless clients can be physically
located and still connect to the RoamAbout R2. Coverage area is determined by a number
of factors, including the speed of the RoamAbout PC Card, physical obstructions, and noise
levels.
If possible, temporarily connect the RoamAbout R2 and use the RoamAbout utilities
described in the RoamAbout 802.11 Wireless Networking Guide to determine the actual
coverage area. Using these tools can help you determine the best place to mount the
RoamAbout R2.

Antenna Information

This document contains only installation information for the indoor antenna. If you are
planning to use an outdoor antenna refer to the RoamAbout Outdoor Antenna Site
Preparation and Installation Guide for Regulatory information, FCC requirements, and
detailed procedures to install outdoor antennas.
1-8