Registration Programming - Tadiran Telecom Emerald ICE User Manual

Registration Programming

Registration programming allows a Handset user to register the Handset to the Base Unit.
Proceed with the following to register the Handsets:
Register Handset 1 or 2
NOTE: The following procedures are the same for Handset 1 or Handset 2. Each Handset must
be registered individually.
Cordless Handset Soft Keys
F1 Key
1. Unplug Line 1 from the rear of the Base Unit.
2. Set the DIP switches on the Base Unit as follows:
DIP SWITCH‐1 to OFF (up)
DIP SWITCH‐2 to ON(down)
DIP SWITCH‐3 to ON (down)
If the Handset was never registered, the LCD will display the following message.
Page 6-6
F2 Key
F3 Key
Hold Key
System Registration and Deregistration
Base Unit (Rear View)
Line 2
Line 1
9VDC (Not Used)
DIP Switches