Tadiran Telecom Emerald ICE User Manual page 76

Cordless telephone set

Hide thumbs Also See for Emerald ICE:

Table of Contents

4. Turn all of the DIP SWITCH on the base unit to OFF (up).

NOTE: The LED on the base unit will flash normally when the base unit returns to normal

mode.

Deregistration of Both Handsets Individually Using the Base Unit

Handset 1

1. Unplug Line 1 from the rear of the Base Unit.

2. Set Base Unit DIP switches as follows:

DIP SWITCH‐1 to OFF (up)

DIP SWITCH‐2 to OFF (up)

DIP SWITCH‐3 to ON (down)

3. Plug Line 1 into the marked receptacle on the rear of the Base Unit. The LED on the

Base Unit will flash rapidly.

After 30 seconds, Handset 1 will be de‐registered.

4. Turn all of the DIP Switches on the base unit to the OFF (up) position.

NOTE: The LED on the base unit will flash normally when the base unit returns to normal

mode.

Page 6-2

Base Unit (Rear View)

Line 2

Line 1

9VDC (Not Used)

System Registration and Deregistration

DIP Switches

Table of Contents

Need help?

Do you have a question about the Emerald ICE and is the answer not in the manual?