No Link To Base Status; Ring And Vibrator Status - Tadiran Telecom Emerald ICE User Manual

Status Indications

No Link to Base Status

If the Handset is at an extended distance away from the Base Unit or the power of the Base
Unit is removed for 30 seconds, the Handset will display NO LINK TO BASE to indicate
that the Handset cannot link with the Base Unit.
Rows 2 and 3 of the LCD display will not receive information from the Base Unit and
appear blank on the display.
It is recommended that you follow the procedures in "Registration Programming" on
page 6‐6 to Register the Handset to verify the registration status.

Ring and Vibrator Status

If you are in Ring mode only, a Ring icon (bell) will appear on the display.
If you select Vibrator mode only, (( )) will appear on the display.
If you select Ring and Vibrator mode, both icons will be displayed.
Page 4-2