Tadiran Telecom Emerald ICE User Manual page 25

c. To program a feature code (from step 2), press the F2 button beneath pgm.
Func
d. Press the
e. Enter the feature code: for example, enter
press the F2 button beneath save.
5. Continue programming other Feature/Line Buttons or press the Talk button on the
Handset twice to exit this programming.
If you dial an invalid code you will hear error tone and the display will show "CODE
UNAVAILABLE."
In some cases a user can program a FeatureButton for a specific CO line although access is
restricted to that line via database programming. In this situation, the telephone is still gov‐
erned by database programming and would still be unable to access the CO line if
restricted.
Valid feature codes must be in the form of either "Pn" or "Pnn" where "P" is the Feature
Button and "n" is either a single‐digit or two‐digit code, including asterisk (*) and pound
(#) dialed from the dial pad.
Any Feature/Button programmed with a code previously assigned to a different Feature‐
Button will cause the previously programmed Feature Button to become unassigned.
FeatureButtons can be cleared of any feature code/directory number by pressing the F2 but‐
ton beneath save before entering a code/number.
PGM CODE:_
bksp
button on the Handset.
Emerald ICE Cordless EKT Telephone Set User Guide
save chg
4#
for Do Not Disturb (DND) and then
Page 2-7