Tadiran Telecom Emerald ICE User Manual page 81

3. Press and hold the F1 Key for 5 seconds to enter the System Programming mode. The
LCD will display the following:
4. Press the F2 Key to select the registration mode.
5. Press the F3 Key to enter registration mode. The LCD will display the following:
6. Press the F2 Key to select YES.
7. Reattach Line 1 to the marked slot in the rear of the Base Unit. The LED on the Base
Unit will flash rapidly.
8. Press the F3 Key to begin the registration process. The LCD will display the following:
9. Move the Handset close to the Base Unit. The system will start to register with the base
unit. If the registration operation is successful, the LCD will display the following:
Emerald ICE Cordless Telephone Set User Guide
Page 6-7