Led Flash Cadences - Tadiran Telecom Emerald ICE User Manual

Cordless telephone set

Hide thumbs Also See for Emerald ICE:

Table of Contents

LED Flash Cadences

The user can use the above programming function keys to set up 3 different LED flash

cadences as follows:

1. Normal Operation: LED Flashes [Normally]: 500ms on, 500ms off, repeatedly. In Nor‐

mal mode, the user can make/receive a call by the Handset unit through the base unit.

2. Base In Transition Mode: LED Flash [Slowly]: 1000ms on, 1000ms off, repeatedly. In the

Transition mode, the user changes the DIP switches status. The system will wait for 5

seconds to ensure correct operation.

3. Base In Register/De‐Register Mode: LED Flash [Fast]: 125ms on, 125ms off, repeatedly.

After a user changes DIP switches status for 5 seconds, the base enters the register and/

or de‐register mode. The user can register/de‐register the Handset to the base. Both

Registration and De‐Registration must be performed within the 20‐second window in

which the LED flashes in Fast mode.

NOTE: The LED will flash fast for 20 seconds before returning to a slow flash.

Before Programming...

Prior to programming the Handsets it is recommended that you perform the deregistration

procedures described in "System Registration and Deregistration" on page 6‐1.

Emerald ICE Cordless Phone Set User Guide

Page 1-5

Table of Contents

Do you have a question about the Emerald ICE and is the answer not in the manual?