Table of Contents
Advertisement
Smart Viewer User's Manual
4. Smart Viewer Configuration
4.1. Channel Control Bar (NVS or Network Camera only)
When the Smart Viewer window is displayed for Network Video Server or Network Cameras, a
channel control Bar will be shown on the left of the window.
Channel 1
Channel 2
All Channel
None Channel
Pause
5. Video Control
5.1. Display method
There are 4 ways to control size of live video screen.
Display live view in full screen mode. (Press ESC key to return to normal mode)
The video will be displayed as the original resolution. Use the scroll wheel of mouse for zooming
in and out. If the video becomes larger than the window size, a small screen is displayed to
show location of the window in the video. Pressing the middle button of the mouse (scroll wheel)
will display the video in actual size. You can also use
original size.
If video is smaller than the screen, it is displayed in the original size. If video is larger than the
screen, it is adjusted to fit to the screen with the same aspect ratio. Zooming is not supported in
this mode.
Video will be resized to fill the entire screen. Zooming is not supported in this mode.
5.2. OSD Channels Buttons
5.2.1. Saving as Image File
In Smart Viewer, Live video currently displayed can be captured and saved as image file either in JPEG or
BMP format. Select the live view video you want save, and click Snapshot button on OSD Channel
Buttons. The following window will be displayed.
Display or hide the live view video from Channel 1
Display or hide the live view video from Channel 2
Display the live view videos from all the channels
Hide the live view videos from all the channels
Pause the live view video from the chosen channel
XIII
+
-
/
,
,
keys for zoom-in, zoom-out, and
Advertisement
Table of Contents
