Table of Contents
Advertisement
Web Admin User Manual
2.3.
Step 3: Network Setup
To make a connection to the Internet, it is required to figure out the type of the Internet service
you're using. See the section 4.1 Network Configuration in page - 18 - to see how to set up.
2.4.
Step 4: IP-CCTV DNS
When Server is used in a Dynamic IP environment, it is required to utilize IP-CCTV DNS feature.
See the section 4.6 IP-CCTV DNS Setup in page - 24 - to see how to set up.
2.5.
Step 5: Recording Configuration
Each camera can be configured for recording option in this section.
2.6.
Finish (Save configuration)
You need to save all the changes to the Flash Memory after finishing the configuration. The
changes made to Server will be permanent by this step. Click Finish on Quick Configuration
menu.
Click Save Configuration button. This will write the new settings to the system's flash memory.
If you don't want to save them, click Back button.
3.
System Configuration Menu
When you click on System Configuration item on Admin Menu, the following sub menu will be
displayed.
- 11 -
Advertisement
Table of Contents
