Table of Contents
Advertisement
Web Admin User Manual
Item
Condition 1~4
Graphs for Time, Day of week,
Alarm, Motion, Camera
Connection
Recording Service
Server Module ID
Camera Number
Camera Name
Pre-Recording Speed
Pre-Alarm Count
Post-Recording Speed
Post-Alarm Count
Up to 4 different recording conditions can be set per camera. All the conditions are checked by
OR logic, so it will start recording when at least one of the conditions is met. To set a condition,
click Condition 1, then Condition setup screen will be displayed.
Description
Set the conditions for recording
Graphic displays of conditions for recording
Click Enable to record the video. Click Disable
otherwise.
Server ID number of the added VS Module ID (IP
Devices).
Camera number to select.
The name of the camera selected. Use up to 31
alphanumeric or 15 Unicode characters.
Recording speed before Event. Valid only when
Recording condition is set to Always or Schedule.
The number of frames stored before Event. Up to 5
frames. Valid only for Event-Driven Recording.
Recording speed after Event. Valid only when
Recording condition is set to Event-Driven
Recording.
The number of frames stored after Event. Up to 5
frames. Valid only for Event-Driven Recording.
- 65 -
Advertisement
Table of Contents
