Table of Contents
Advertisement
Web Admin User Manual
• Video with server name: If Enabled, video data will contain the server name that you
defined.
• Video with IP address: If Enabled, video data will contain the IP address of the video
server.
• Audio: Select if Audio function is to be used (applies to Primary Stream only). Server
provides 2-way audio streaming by combining microphone input with video data. Users can
listen to the streamed audio on PC speakers.
• Frame Rate: For Primary Stream, this is the number of frames compressed in every second.
You can control the network traffic with this parameter. For Secondary Stream, it can be set
to manner of 1/2, 1/4, 1/8... of the primary stream.
• Image Size: Select the resolution of each channel's video
• Encoding Standard: Select the compression method of each video, either M-JPEG or H.264
format. It is not allowed to set both channels to M-JPEG.
To save the setting, click Apply button.
Camera Configuration
On the lower part of Camera & Motion Configuration menu, select a channel to configure.
In the example shown below, Primary Stream is set to M-JPEG, and Secondary Stream set to
H.264 for compression format. Enter detailed parameters of the camera selected here.
- 36 -
Advertisement
Table of Contents
