Web Admin User Manual
6.1.4. Sensor Notification Service Configuration
Item
Input 1 - Input 2
Service
Service Mode
Main IP address
Aux1 ~ Aux 3 IP
address
Port
CGI Path or
Alarm Common
Message
User ID
Password
Select which input to set up for Sensor Notification Service
Select Enable to use Sensor Notification. Otherwise select
Disable.
Select network mode for CGI. Select one among HTTP, TCP, or
UDP.
Enter IP address to use in CGI or other functions
Enter 3 more addresses to use in CGI or other functions if
needed.
Enter port number for CGI or other functions. Default is 80.
Enter CGI Path for CGI or other functions.
Enter User ID to log in.
Enter Password for the User ID to log in.
- 56 -
Description